OmnesAudio-Lautsprecher

OmnesAudio

Omnes Audio develops speaker for car hifi, multimedia and home stereo systems.

Tweeter
	MT 2.01 order no. BP-MT201 EUR 67,90 ribbon tweeter. frequency range = 1200-30000 Hz resonance frequency fs = 1500 Hz impedance R = 8 Ohm sound pressure level SPL = 92 dB (2,83V; 1m) DC resistance Re = 7,6 Ohm mounting depth (not countersunk) t = 22 mm PDF data sheet
show kits to this chassis hide kits
Full Range
recommended cabinet 1: closed cabinet with 0,35 L volume from 217/137 Hz (-3dB/-8dB) recommended cabinet 2: 1,2 L volume bass reflex cabinet with 2cm-Rohr reflex tube, 6 cm long. from 113/89 Hz (-3dB/-8dB).	BB 3.01 order no. BP-BB301 EUR 34,90 8 cm full range driver with high quality cone. power handling (continuous/programme) = 15/40 W frequency range = 100-20000 Hz resonance frequency fs = 95 Hz impedance R = 5 Ohm sound pressure level SPL = 87 dB (2,83V; 1m) DC resistance Re = 3,6 Ohm force factor BL = 3,42 N/A voice coil inductance L = 8,7 mH effective piston radiating area Sd = 32 cm² effective mechanical mass incl. air load mms = 2,3 g equivalent volume of compliance Vas = 1,757 l total Q factor Qts = 0,34 (Qms=1,81, Qes=0,42) mounting diameter d = 74 mm overall diameter d = 93 mm mounting depth (not countersunk) t = 48 mm
show kits to this chassis hide kits
	BB 3.AL order no. BP-BB3al EUR 23,95 8 cm full range driver with aluminium cone. The magnet system is based on Neodymium technology. frequency range = 80-20000 Hz resonance frequency fs = 65 Hz impedance R = 6 Ohm effective mechanical mass incl. air load mms = 2 g voice coil diameter = 25 mm
show kits to this chassis hide kits
Coaxial speaker
	CX 3.0 order no. BP-CX30 EUR 44,95 9 cm coax driver with aluminium cone. resonance frequency fs = 186,37 Hz impedance R = 8 Ohm DC resistance Re = 5,2 Ohm effective piston radiating area Sd = 45 cm² effective mechanical mass incl. air load mms = 3,53 g equivalent volume of compliance Vas = 0,59 l total Q factor Qts = 0,84 (Qms=2786, Qes=0,837) voice coil diameter = 30 mm mounting diameter d = 84 mm overall diameter d = 95 mm mounting depth (not countersunk) t = 65 mm
show kits to this chassis hide kits
Woofer
recommended cabinet 1: closed cabinet with 4 L volume from 105/66 Hz (-3dB/-8dB) recommended cabinet 2: 15 L volume bass reflex cabinet with HP70 reflex tube, 19 cm long. from 51/42 Hz (-3dB/-8dB).	MW 5W order no. BP-mw5w EUR 27,95 14 cm bass-midrange driver with paper cone. To avoid compression effects the driver possesses a pole piece hole. The spider is rear ventilated for better cooling. resonance frequency fs = 54,82 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 5,2 Ohm effective piston radiating area Sd = 99 cm² effective mechanical mass incl. air load mms = 8,97 g equivalent volume of compliance Vas = 12,72 l total Q factor Qts = 0,42 (Qms=6,19, Qes=0,45) voice coil diameter = 25,55 mm mounting diameter d = 124 mm overall diameter d = 150 mm mounting depth (not countersunk) t = 71 mm
show kits to this chassis hide kits
recommended cabinet 1: closed cabinet with 2,5 L volume from 102/64 Hz (-3dB/-8dB) recommended cabinet 2: 8,5 L volume bass reflex cabinet with HP50 reflex tube, 20 cm long. from 53/42 Hz (-3dB/-8dB).	MW 6W order no. BP-mw6w EUR 37,95 16 cm bass-midrange driver with paper cone. To avoid compression effects the driver possesses a pole piece hole. The spider is rear ventilated for better cooling. resonance frequency fs = 44,57 Hz impedance R = 8 Ohm DC resistance Re = 6,3 Ohm effective piston radiating area Sd = 145 cm² effective mechanical mass incl. air load mms = 12,42 g equivalent volume of compliance Vas = 12,73 l total Q factor Qts = 0,35 (Qms=7,38, Qes=0,37) voice coil diameter = 32,5 mm mounting diameter d = 148 mm overall diameter d = 180 mm mounting depth (not countersunk) t = 84 mm
show kits to this chassis hide kits
recommended cabinet 1: closed cabinet with 6,1 L volume from 94/59 Hz (-3dB/-8dB) recommended cabinet 2: 18 L volume bass reflex cabinet with HP70 reflex tube, 20 cm long. from 51/40 Hz (-3dB/-8dB).	MW 8W order no. BP-mw8w EUR 47,95 20 cm bass-midrange driver with paper cone. To avoid compression effects the driver possesses a pole piece hole. The spider is rear ventilated for better cooling. resonance frequency fs = 36,51 Hz impedance R = 8 Ohm DC resistance Re = 5,8 Ohm effective piston radiating area Sd = 216 cm² effective mechanical mass incl. air load mms = 30,25 g equivalent volume of compliance Vas = 41,07 l total Q factor Qts = 0,31 (Qms=7,91, Qes=0,32) voice coil diameter = 38,55 mm mounting diameter d = 184 mm overall diameter d = 220 mm mounting depth (not countersunk) t = 100 mm
show kits to this chassis hide kits
Subwoofer
recommended cabinet 1: closed cabinet with 12,7 L volume from 72/46 Hz (-3dB/-8dB) recommended cabinet 2: 43 L volume bass reflex cabinet with HP100 reflex tube, 33 cm long. from 38/30 Hz (-3dB/-8dB).	SW 12.01 PC order no. BP-sw1201pc EUR 146,00 31 cm bass driver with paper cone. power handling (continuous/programme) = 350/600 W frequency range = 32-500 Hz resonance frequency fs = 31,6 Hz impedance R = 4 Ohm sound pressure level SPL = 89,4 dB (2,83V; 1m) DC resistance Re = 3,2 Ohm force factor BL = 15,1 N/A voice coil inductance L = 2,39 mH effective piston radiating area Sd = 479 cm² effective mechanical mass incl. air load mms = 126 g equivalent volume of compliance Vas = 64,3 l total Q factor Qts = 0,34 (Qms=9,49, Qes=0,35) voice coil diameter = 63 mm mounting diameter d = 285 mm overall diameter d = 325 mm mounting depth (not countersunk) t = 155 mm PDF data sheet
show kits to this chassis hide kits
no longer sold
	L8 order no. BP-L8 - not available 21 cm full range driver with paper cone. power handling (continuous/programme) = 30/60 W frequency range = 100-17000 Hz resonance frequency fs = 95 Hz impedance R = 8 Ohm sound pressure level SPL = 96 dB (2,83V; 1m) DC resistance Re = 6,2 Ohm force factor BL = 5,69 N/A voice coil inductance L = 0,42 mH effective piston radiating area Sd = 219 cm² effective mechanical mass incl. air load mms = 9,18 g equivalent volume of compliance Vas = 15 l total Q factor Qts = 1,04 (Qms=7,1, Qes=1,22) mounting diameter d = 190 mm overall diameter d = 230 mm mounting depth (not countersunk) t = 87 mm PDF data sheet
show kits to this chassis hide kits
	MW 5.01 PC-S order no. BP-MW501 - not available 13 cm bass driver with paper cone. power handling (continuous/programme) = 60/80 W frequency range = 40-5000 Hz resonance frequency fs = 54,16 Hz impedance R = 8 Ohm sound pressure level SPL = 85 dB (2,83V; 1m) DC resistance Re = 7,2 Ohm force factor BL = 6,24 N/A voice coil inductance L = 0,77 mH effective piston radiating area Sd = 18,92 cm² effective mechanical mass incl. air load mms = 7,58 g equivalent volume of compliance Vas = 10,4 l total Q factor Qts = 0,68 (Qms=3,87, Qes=0,82) voice coil diameter = 25 mm mounting diameter d = 122 mm overall diameter d = 142 mm mounting depth (not countersunk) t = 97 mm PDF data sheet
show kits to this chassis hide kits
recommended cabinet 1: closed cabinet with 12,8 L volume from 69/43 Hz (-3dB/-8dB) recommended cabinet 2: 52 L volume bass reflex cabinet with HP70 reflex tube, 11 cm long. from 31/27 Hz (-3dB/-8dB).	MW 7.01 PC-S order no. BP-MW701 - not available 16 cm bass driver with paper cone. power handling (continuous/programme) = 80/100 W frequency range = 40-4000 Hz resonance frequency fs = 46 Hz impedance R = 8 Ohm sound pressure level SPL = 88 dB (2,83V; 1m) DC resistance Re = 7,1 Ohm force factor BL = 6,48 N/A voice coil inductance L = 1,02 mH effective piston radiating area Sd = 138,9 cm² effective mechanical mass incl. air load mms = 16,8 g equivalent volume of compliance Vas = 19,08 l total Q factor Qts = 0,53 (Qms=1,79, Qes=0,76) voice coil diameter = 38 mm mounting diameter d = 147 mm overall diameter d = 167 mm mounting depth (not countersunk) t = 93 mm PDF data sheet
show kits to this chassis hide kits
	MW 8.01 PC-S order no. BP-MW801 - not available 19 cm bass driver with paper cone. power handling (continuous/programme) = 100/130 W frequency range = 30-3000 Hz resonance frequency fs = 37,6 Hz impedance R = 8 Ohm sound pressure level SPL = 86 dB (2,83V; 1m) DC resistance Re = 7,2 Ohm force factor BL = 7,2 N/A voice coil inductance L = 0,5 mH effective piston radiating area Sd = 214 cm² effective mechanical mass incl. air load mms = 28,28 g equivalent volume of compliance Vas = 40,7 l total Q factor Qts = 0,68 (Qms=2,43, Qes=0,94) voice coil diameter = 38 mm mounting diameter d = 183 mm overall diameter d = 203 mm mounting depth (not countersunk) t = 86 mm PDF data sheet
show kits to this chassis hide kits

Tweeter

Full Range

Coaxial speaker

Woofer

Subwoofer

no longer sold

The cabinet volume calculations are executed considering an external resistance of 0.3 Ohm. We are using, if no other data is known or available, the information supplied by the manufacturer.

Please note: the frequency response doesn't say much about the cut-off frequency inside the cabinet! Therefore, we mostly give you 2 examples with dimensioning considerations and an indication, how low the loudspeaker will reproduce.